Pharzen Science: Performance parameters of explosion-proof TCU temperature control system(-80~100℃)
Time:
Operational temperature range | -80 ° C ~ 100 ° C (water-cooling) |
Control mode |
PID feed-forward control, Model-free self-built tree algorithm, PLC |
Temperature control selection |
Material temperature control and jacket temperature control can be freely selected |
Temperature control |
The temperature difference between the jacket temperature and the material temperature can be controlled and set |
PROM |
It can compile 20 programs, each program can compile 45 steps |
Modbus Protocol |
MODBUS RTU, RS-485 interface |
Temperature feedback (optional) |
Equipment heat conducting medium, inlet temperature, outlet temperature, heater temperature, reactor material temperature (external temperature sensor), four point temperature |
Material temperature control accuracy |
±1℃ |
Heating power | 200kW |
Refrigerating capacity of 100℃ |
200kW |
Refrigerating capacity of 50℃ |
200kW |
Refrigerating capacity of 0℃ |
178kW |
Refrigerating capacity of -20℃ |
153kW |
Refrigerating capacity of -40℃ |
130kW |
Refrigerating capacity of -60℃ |
98kW |
Circulating pump flow and pressure |
Max*110L/min2bar |
Compressor |
Emerson 100 |
Expansion valve | Danfoss |
Evaporator | Plate heat exchanger |
Operation panel | Temperature Controller |
Safety protection |
Self-diagnosis, overload protection of refrigerator; High voltage pressure switch, overload relay, thermal protection device and other security functions |
Closed circulation system |
The whole system is completely closed, there will be no oil mist at high temperature, no moisture absorption in the air at low temperature, no pressure rise due to high temperature during the operation of the system, and low temperature will automatically supplement the heat conduction medium |
Pipe size |
DN25 flange |
Boundary dimension |
1300*2000*1800mm |
Refrigerating fluid |
R-404A/R508A |
Power supply | AC380V 50HZ |
Shell material |
Material cold plate spray |
Net | About 1.5 tons |